768 お客様のコメント
クリック」
質問 1：
Scenario: An administrator configured link aggregation on two switch ports that are connected to the XenServer network interface card (NIC) bond. NO network flow is possible on the NIC bond.
How can the administrator resolve this networking issue?
A. Ensure that the IP address is correct on the NIC bond.
B. Change the NIC bond to active/active.
C. Remove link aggregation from the switch ports.
D. Configure link aggregation with failover.
E. Remove the NIC bond.
正解：C
質問 2：
Scenario: An administrator tries to start a virtual machine on a host that has an NFS storage repository. The virtual machine gives the error "This virtual machine needs storage that cannot be seen from the server."
Which action, within XenCenter, can the administrator take on the NFS storage repository to correct this issue?
A. Repair
B. Detach
C. Forget
D. Set as default
正解：A
質問 3：
An administrator needs to authenticate all users when they log into the XenServer pool using their Windows credentials.
What is the first step the administrator must take to achieve this?
A. Add each user to the Users tab in XenCenter.
B. Join the XenServer pool to the domain.
C. Create Active Directory accounts for the XenServer users.
D. Create a XenServer user group within Active Directory.
正解：B
質問 4：
Scenario: An administrator is adding a new host to a XenServer resource pool. XenServer is already installed on the host, but the NTP server settings are configured incorrectly on the host.
Which file can the administrator edit to adjust the NTP server settings on the new XenServer host?
A. /etc/ntp/step-tickers
B. /etc/ntp/keys
C. /etc/ntp.conf
D. /etc/init.d/ntpd
正解：C
質問 5：
Scenario: A XenServer pool consists of two XenServer hosts that each have four network interface cards (NICs). The first two NICs form a bond that is used for management and virtual machine network traffic. The other two NICs are unused. The administrator notices that the system is using all available network bandwidth and iSCSI disk performance is being affected.
Which network type could the administrator create to move the storage traffic to one of the unused NICs?
A. Cross-server private
B. Bonded
C. Single-server private
D. Management
正解：D
質問 6：
An administrator has two datacenters, each of which has its own storage that can only be accessed by hosts that are in the same datacenter.
What could the administrator create to ensure that each host can only access its assigned storage?
A. Site
B. Store
C. Target device
D. Device collection
正解：A
質問 7：
Scenario: An administrator has to configure a small scale, isolated Provisioning services test environment. The administrator has placed a non-Microsoft DHCP server on the same server as Provisioning services, which is running the PXE Service.
Which DHCP option must the administrator configure to enable PXE functionality?
A. 66
B. 64
C. 67
D. 60
正解：D
質問 8：
An administrator needs to reconfigure the stream server boot list following a server failure.
How could the administrator ensure the replacement server is included in the stream server boot list?
A. Restart the Stream Service.
B. Add the IP address of the new server to the ARDBP32.bin file.
C. Update the target device "Boot From" setting.
D. Enable Automatic vDisk updates.
正解：B
質問 9：
Scenario: An administrator is installing Provisioning services on a new server. DHCP and PXE servers are already configured.
Which option must the administrator select during the initial Provisioning services configuration to configure the PXE Service?
A. Other BOOTP or DHCP Service
B. Microsoft DHCP
C. The service that runs on another computer
D. Provisioning services BOOTP Service
正解：C
Scenario: An administrator configured link aggregation on two switch ports that are connected to the XenServer network interface card (NIC) bond. NO network flow is possible on the NIC bond.
How can the administrator resolve this networking issue?
A. Ensure that the IP address is correct on the NIC bond.
B. Change the NIC bond to active/active.
C. Remove link aggregation from the switch ports.
D. Configure link aggregation with failover.
E. Remove the NIC bond.
正解：C
質問 2：
Scenario: An administrator tries to start a virtual machine on a host that has an NFS storage repository. The virtual machine gives the error "This virtual machine needs storage that cannot be seen from the server."
Which action, within XenCenter, can the administrator take on the NFS storage repository to correct this issue?
A. Repair
B. Detach
C. Forget
D. Set as default
正解：A
質問 3：
An administrator needs to authenticate all users when they log into the XenServer pool using their Windows credentials.
What is the first step the administrator must take to achieve this?
A. Add each user to the Users tab in XenCenter.
B. Join the XenServer pool to the domain.
C. Create Active Directory accounts for the XenServer users.
D. Create a XenServer user group within Active Directory.
正解：B
質問 4：
Scenario: An administrator is adding a new host to a XenServer resource pool. XenServer is already installed on the host, but the NTP server settings are configured incorrectly on the host.
Which file can the administrator edit to adjust the NTP server settings on the new XenServer host?
A. /etc/ntp/step-tickers
B. /etc/ntp/keys
C. /etc/ntp.conf
D. /etc/init.d/ntpd
正解：C
質問 5：
Scenario: A XenServer pool consists of two XenServer hosts that each have four network interface cards (NICs). The first two NICs form a bond that is used for management and virtual machine network traffic. The other two NICs are unused. The administrator notices that the system is using all available network bandwidth and iSCSI disk performance is being affected.
Which network type could the administrator create to move the storage traffic to one of the unused NICs?
A. Cross-server private
B. Bonded
C. Single-server private
D. Management
正解：D
質問 6：
An administrator has two datacenters, each of which has its own storage that can only be accessed by hosts that are in the same datacenter.
What could the administrator create to ensure that each host can only access its assigned storage?
A. Site
B. Store
C. Target device
D. Device collection
正解：A
質問 7：
Scenario: An administrator has to configure a small scale, isolated Provisioning services test environment. The administrator has placed a non-Microsoft DHCP server on the same server as Provisioning services, which is running the PXE Service.
Which DHCP option must the administrator configure to enable PXE functionality?
A. 66
B. 64
C. 67
D. 60
正解：D
質問 8：
An administrator needs to reconfigure the stream server boot list following a server failure.
How could the administrator ensure the replacement server is included in the stream server boot list?
A. Restart the Stream Service.
B. Add the IP address of the new server to the ARDBP32.bin file.
C. Update the target device "Boot From" setting.
D. Enable Automatic vDisk updates.
正解：B
質問 9：
Scenario: An administrator is installing Provisioning services on a new server. DHCP and PXE servers are already configured.
Which option must the administrator select during the initial Provisioning services configuration to configure the PXE Service?
A. Other BOOTP or DHCP Service
B. Microsoft DHCP
C. The service that runs on another computer
D. Provisioning services BOOTP Service
正解：C
松尾** -
この1Y0-A26問題集は使いこなせるのであれば私が一番おすすめする問題集