VCP550勉強の資料、VCP550認定資格、VCP-510日本語版勉強の資料 - http://www.pass4test.jp/VCP550.html

200-310認定テキスト、350-018v4試験解答

NO.1 Which two EAP methods may be susceptible to offline dictionary attacks? (Choose two.)
A. EAP-MD5
B. PEAP with MS-CHAPv2
C. EAP-FAST
D. LEAP
Answer: A,D

350-018v4デモ   
Explanation:
PEAP uses a TLS channel to protect the user credentials. Other Password -based methods such as
EAP-MD5 & LEAP do not create TLS channel and are exposed to offline dictionary attacks on the user
credentials. Using the TLS channel from the client to the authentication server, PEAP offer end-to-end
protection, not just over the wireless datalink.

NO.2 Which statement about Storm Control implementation on a switch is true?
A. Storm Control uses the bandwidth and rate at which a packet is received to measure the activity.
B. Storm Control is enabled by default.
C. Storm Control does not prevent disruption due to unicast traffic.
D. Storm Control uses the bandwidth and rate at which a packet is dispatched to measure the
activity.
E. Storm Control is implemented as a global configuration.
Answer: A

350-018v4返済   350-018v4模試   
Explanation:
The traffic storm control threshold numbers and the time interval combination make the traffic storm
control algorithm work with different levels of granularity. A higher threshold allows more packets to
pass through. Traffic storm control is implemented in hardware. The traffic storm control circuitry
monitors packets passing from a LAN interface to the switching bus. Using the Individual/Group bit in
the packet destination address, the traffic storm control circuitry determines if the packet is unicast
or broadcast, keeps track of the current count of packets within the 1-second interval and when the
threshold is reached, traffic storm control filters out subsequent packets.
Reference:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/122SX/configuration/guide/b
ook/storm.pdf

NO.3 Refer to the exhibit.
If SW4 is sending superior BPDUs, where should the root guard feature be configured to preserve
SW3 as a root bridge?
A. SW4 Gi0/0 interface.
B. Sw2 Gi0/1 interface.
C. SW2 Gi0/1 and SW3 Gi0/1
D. Sw3 Gi0/0 interface.
Answer: B

350-018v4資格受験料   
Explanation:
Root guard is a feature that can be used to influence which switches are eligible to become the root
bridge. Although priorities are used to determine who becomes the root bridge, they provide no
mechanism to determine who is eligible to become the root bridge. There is nothing to stop a new
switch being introduced to the network with a lower bridge ID, which allows it to become the root
bridge. The introduction of this new switch can affect the network, as new paths may be formed that
are not ideal for the traffic flows of the network. Figure demonstrates why you might need to
configure root guard.
Figure Root Guard Topology In figure, a new switch (Switch-D) has been added to the network by
connecting to Switch-
C. Currently Switch-A is the root bridge and has a gigabit connection to Switch-B, which is the
secondary root bridge. A lot of server-to-server traffic traverses the link between Switch-A and
Switch-B. Switch-D has been configured with the lowest priority in the network (a priority of 0 as
indicated by the bridge ID of Switch-D), and thus becomes the root bridge. This has the effect of
blocking the gigabit port (port 2/1) on Switch-B, severely affecting the performance of the network,
because server traffic must travel over 100-Mbps uplinks from Switch-A
Switch-C
Switch-B and vice versa. To prevent the scenario in Figure from occurring, you can configure the root
guard feature to prevent unauthorized switches from becoming the root bridge. When you enable
root guard on a port, if superior configuration BPDUs to the current configuration BPDUS generated
by the root bridge are received, the switch blocks the port, discards the superior BPDUs and assigns a
state of root inconsistent to the port.

NO.4 Refer to the exhibit.
To configure the Cisco ASA, what should you enter in the Name field, under the Group Authentication
option for the IPSec VPN client?
A. tunnel group name
B. group policy name
C. crypto ipsec transform-set name
D. isakmp policy name
E. crypto map name
Answer: A

350-018v4最新版   
Explanation:
The Name in the VPN client refers to the name of the tunnel group configured on the ASA.
Group name is case sensitive, so please make sure that you type is correctly.

NO.5 Which three fields are part of the AH header? (Choose three.)
A. Source Address
B. SPI identifying SA
C. Application Port
D. Next Header
E. Protocol ID
F. Packet ICV
G. Destination Address
Answer: B,D,F

350-018v4無料試験対策   
Explanation:
The following AH packet diagram shows how an AH packet is constructed and interpreted:[8][9]
Authentication Header format Offsets
Octet16 0 1 2 3 Octet16 Bit10 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 0 0
Next Header Payload Len Reserved
4 32
Security Parameters Index (SPI)
8 64
Sequence Number
C 96
Integrity Check Value (ICV)...
... ...
Reference: https://en.wikipedia.org/wiki/IPsec

NO.6 With the Cisco FlexVPN solution, which four VPN deployments are supported? (Choose four.)
A. dynamic spoke-to-spoke IPSec tunnels? (partial mesh)
B. distributed full mesh IPsec tunnels?
C. site-to-site IPsec tunnels?
D. IPsec group encryption using GDOI?
E. hub-and-spoke IPsec tunnels?
F. remote access from software or hardware IPsec clients?
Answer: A,C,E,F

350-018v4難易度受験料   
Explanation:
Flex is a way to combine multiple frameworks (crypto maps, ezvpn, DMVPN) into single,
comprehendible set of CLI and bind it together with something offering more flexibility and means to
extend functionality in future.

NO.7 Refer to the exhibit.
Why does the EasyVPN session fail to establish between the client and server?
A. Incomplete ISAKMP profile configuration on the server
B. ISAKMP key mismatch
C. Incorrect group configuration on the client
D. Incorrect IPsec phase-2 configuration on the server
E. Incorrect virtual-template configuration on the sever
Answer: A

350-018v4暗記カード   
Explanation:
Under the isakmp configuration on the server, this command is missing:
Isakmp configuration address respond
If this command is not applied then the client will not be able to obtain the ip address from the ip
pool defined on the server.

NO.8 Which command is required in order for the Botnet Traffic Filter on the Cisco ASA appliance to
function properly?
A. dynamic-filter inspect tcp/80
B. inspect botnet
C. dynamic-filter whitelist
D. inspect dns dynamic-filter-snoop
Answer: D
Explanation:
Enable DNS snooping on the external interface ASA(config)# policy-map botnet-policy ASA(config-
pmap)# class botnet-DNS
ASA(config-pmap-c)# inspect dns dynamic-filter-snoop
Reference: https://supportforums.cisco.com/document/33011/asa-botnet-configuration

現在、IT業界での激しい競争に直面しているあなたは、無力に感じるでしょう。これは避けられないことですから、あなたがしなければならないことは、自分のキャリアを護衛するのです。色々な選択がありますが、Pass4TestのCiscoの200-310認定テキストと解答をお勧めします。それはあなたが成功認定を助ける良いヘルパーですから、あなたはまだ何を待っているのですか。速く最新のPass4TestのCiscoの200-310認定テキストを取りに行きましょう。

Pass4Testの350-018v4試験解答はあなたの一発合格を保証できる資料です。問題集の的中率はとても高いですから、この問題集だけで試験に合格することができます。信じられなら利用してみてください。不合格になればPass4Testは全額返金のことができますから、絶対損にならないです。利用したら350-018v4試験解答の品質がわかるようになるので、まず問題集の無料なサンプルを試しましょう。問題集のdemoが無料で提供されますから、Pass4Testのサイトをクリックしてダウンロードしてください。

200-310試験番号:200-310
試験科目:「Designing for Cisco Internetwork Solutions」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間:2016-04-23
問題と解答:全60問 200-310認定テキスト

>> 200-310認定テキスト

 
350-018v4試験番号:350-018v4
試験科目:「CCIE Security Exam (4.0)」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間:2016-04-23
問題と解答:全575問 350-018v4試験解答

>> 350-018v4試験解答

 

Ciscoの200-310認定テキストは人気があるIT認証に属するもので、野心家としてのIT専門家の念願です。このような受験生は200-310認定テキストで高い点数を取得して、自分の構成ファイルは市場の需要と互換性があるように充分な準備をするのは必要です。

Pass4TestのCiscoの200-310認定テキスト「Designing for Cisco Internetwork Solutions」トレーニング資料を利用したら、初めて試験を受けるあなたでも一回で試験に合格できることを保証します。Pass4TestのCiscoの200-310認定テキストを利用しても合格しないのなら、我々は全額で返金することができます。あなたに他の同じ値段の製品を無料に送って差し上げます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.pass4test.jp/350-018v4.html


Related Links: http://blog.vmware-certified-professional.com/?p=11547
投稿日: 2016/4/24 23:00:11  |  カテゴリー: Cisco  |  タグ: 200-310模擬試験問題350-018v4 vueCisco
関連記事
840-425 学習指導 & 300-209 試験解答
642-998 日本語資格取得、300-135 最新対策問題
300-206 試験時間 & 300-360 日本語版対応参考書
642-996 ブロンズ教材、300-165 資格問題対応
300-208日本語 日本語版対応参考書 - 200-125日本語 関連復習問題集、300-135 学習範囲
210-065 技術試験 - 300-115 最新知識
HP2-Z22 学習資料、HP0-M51 全真問題集、HP0-D13 全真模擬試験
070-982全真模擬試験、98-373最新な問題集、MB2-703全真模擬試験
9A0-303模擬練習、9A0-303勉強の資料
的中率が高いOracle 1z0-599認定試験の問題集
HP3-L07 参考書勉強、HP2-B80 勉強の資料、HP0-M52 資格認定
HP0-M53 練習問題、HP2-H18 参考書勉強、HP0-D14 学習教材
難しいCitrix 1Y0-200日本語試験対策に対応する対策
HP2-E44 資格認定、HP2-B82 試験問題集、HP2-Z21 参考書勉強
820-422試験過去問、300-208受験記対策、810-420学習資料
1Y0-371日本語真実試験、1Y0-371日本語過去問
最高なCitrixの1Y0-253試験対策認定試験テストソフトウェア
C_TBIT44_731日本語 最新な問題集、C-TBIT44-73 復習問題集、C_TBIT44_73 復習問題集