923 お客様のコメント
質問 1：
Click the Exhibit button.
A Communication Server 1000 RIs. 7 x customer is adding a new Human Resource department with eight IP telephone users. The customer has asked for the telephones to be programmed with consecutive Directory Number (DNs) from their DID range (20002099).
Which number sequence is available to meet the customer's requirements?
A. 2010 - 2017
B. 2001 - 2008
C. 2091 - 2098
D. 2050 - 2057
正解：C
質問 2：
The Satellite Link Control feature ensures that the configuration of a call does not include more than one communications satellite trunk. Tandem trunk calls, when connected through more than one communication satellite trunk, are subject to transmission distortion due to propagation.
Which parameters are required to be equipped or configured for Satellite Link Control in the Communication Server 1000?
A. Network Signaling (NSIG) package must be equipped.
Route must be configured with ESN3 signaling.
Route must be designated as a satellite route.
B. Route must be configured with STD or ETN signaling.
Route must be designated as a satellite route.
C. Network Transfer (NXFR) package must be equipped.
Route must be configured with ESN2 or ESN3 signaling
Route must be designated as a satellite route.
D. Network Signaling (NSIG) package must be equipped.
Route must be configured with ESN3 or ESN5 signaling.
Route must be programmed with a Traveling Class of Service (TCOS)
正解：A
質問 3：
An existing customer upgraded to Communication Server 1000 RIs 7.5 but plans on staying on an H.323 network environment until their key systems in the network get upgraded to SIP. Their last 7.0 system is just now being put into service and you are configuring the H.323 Gateway Properties using Element Manager.
What is the correct entry for the Primary Gatekeeper IP address?
A. Node ID assigned to the site where the Call Server is located
B. Signaling Server E-LAN IP that hosts the Primary Re-direct Server
C. Signaling Server T-LAN IP that runs the Gatekeeper application
D. Private domain name field for the Gatekeeper
正解：C
質問 4：
Click the Exhibit button.
A customer has deployed a Communication Server 1000 RIs. 7 x system at their site. You have been asked to swap two telephone sets shown in the print-outs.
What win you ten me customer regarding this request?
A. These two telephones can be swapped because they both have the same VCE Class of service.
B. These two telephones cannot be swapped because they are not in the some Call Pickup group.
C. These two telephones cannot be swapped because they do have compatible
D. These two telephones can be swapped because they are both assigned to TGAR 1.
正解：C
質問 5：
When deploying ESA for IP telephones, a method for determining the location of the IP telephones is required. If you are deploying internally, what would one method be?
A. Deploy ESA Package 382 (Virtual Office).
B. Deploy ESA Package 387 (Virtual Office Enhancement)
C. Deploy Discovery Manager (DM)
D. Deploy Location Information Services (US)
正解：C
質問 6：
The Allow Last Digit Repeat function permits a repeated last digit of an ESDN to terminate the call immediately, similar to pressing the octothorpe (#) key. This prevents an ESA call from being dropped if the last ESDN digit is accidentally dialed again, but also processes the call immediately, rather than allowing an extended pause waiting for an additional digit.
To use this feature, which task must you complete first?
A. enable ESDN Digit Repetition
B. enter a Misdial Delay
C. enable Misdial Prevention
D. Create an Emergency Service Directory Number
正解：C
Click the Exhibit button.
A Communication Server 1000 RIs. 7 x customer is adding a new Human Resource department with eight IP telephone users. The customer has asked for the telephones to be programmed with consecutive Directory Number (DNs) from their DID range (20002099).
Which number sequence is available to meet the customer's requirements?
A. 2010 - 2017
B. 2001 - 2008
C. 2091 - 2098
D. 2050 - 2057
正解：C
質問 2：
The Satellite Link Control feature ensures that the configuration of a call does not include more than one communications satellite trunk. Tandem trunk calls, when connected through more than one communication satellite trunk, are subject to transmission distortion due to propagation.
Which parameters are required to be equipped or configured for Satellite Link Control in the Communication Server 1000?
A. Network Signaling (NSIG) package must be equipped.
Route must be configured with ESN3 signaling.
Route must be designated as a satellite route.
B. Route must be configured with STD or ETN signaling.
Route must be designated as a satellite route.
C. Network Transfer (NXFR) package must be equipped.
Route must be configured with ESN2 or ESN3 signaling
Route must be designated as a satellite route.
D. Network Signaling (NSIG) package must be equipped.
Route must be configured with ESN3 or ESN5 signaling.
Route must be programmed with a Traveling Class of Service (TCOS)
正解：A
質問 3：
An existing customer upgraded to Communication Server 1000 RIs 7.5 but plans on staying on an H.323 network environment until their key systems in the network get upgraded to SIP. Their last 7.0 system is just now being put into service and you are configuring the H.323 Gateway Properties using Element Manager.
What is the correct entry for the Primary Gatekeeper IP address?
A. Node ID assigned to the site where the Call Server is located
B. Signaling Server E-LAN IP that hosts the Primary Re-direct Server
C. Signaling Server T-LAN IP that runs the Gatekeeper application
D. Private domain name field for the Gatekeeper
正解：C
質問 4：
Click the Exhibit button.
A customer has deployed a Communication Server 1000 RIs. 7 x system at their site. You have been asked to swap two telephone sets shown in the print-outs.
What win you ten me customer regarding this request?
A. These two telephones can be swapped because they both have the same VCE Class of service.
B. These two telephones cannot be swapped because they are not in the some Call Pickup group.
C. These two telephones cannot be swapped because they do have compatible
D. These two telephones can be swapped because they are both assigned to TGAR 1.
正解：C
質問 5：
When deploying ESA for IP telephones, a method for determining the location of the IP telephones is required. If you are deploying internally, what would one method be?
A. Deploy ESA Package 382 (Virtual Office).
B. Deploy ESA Package 387 (Virtual Office Enhancement)
C. Deploy Discovery Manager (DM)
D. Deploy Location Information Services (US)
正解：C
質問 6：
The Allow Last Digit Repeat function permits a repeated last digit of an ESDN to terminate the call immediately, similar to pressing the octothorpe (#) key. This prevents an ESA call from being dropped if the last ESDN digit is accidentally dialed again, but also processes the call immediately, rather than allowing an extended pause waiting for an additional digit.
To use this feature, which task must you complete first?
A. enable ESDN Digit Repetition
B. enter a Misdial Delay
C. enable Misdial Prevention
D. Create an Emergency Service Directory Number
正解：C
Shiraishi -
全ページが電子化されているので、PDFファイルでダウンロードすることもできるところが大好きです。Pass4Testさんだいちゅき
演習問題も多数収録していますので合格。