質問 1：
Which of the following event delivery types are supported by the WebSphere Adapters?
A. Guaranteed delivery
B. Persistent delivery
C. Ordered delivery
D. Non persistent delivery
正解：C
質問 2：
During testing of an SCA component, an integration developer uses the administrative console to select event points for monitoring using the Common Event Infrastructure (CEI) server.
Which service must be enabled to capture service component event details?
A. Diagnostic Logging service
B. Component Event Monitoring service
C. Diagnostic Trace service
D. Common Base Event Browser service
正解：D
質問 3：
An integration developer has developed a module which depends on two libraries. LIB 1 and LIB
2. The libraries have business objects with a common namespace. The module references a business object A in LIB 1 and business object B in LIB 2.
The integration developer is facing an issue that if the LIB 1 is listed first in the dependency editor the application code within the module can find business object A but not business object B.
Similarly if LIB 2 is listed first in the dependency editor, the program will find business object B but not business object A.
Which of the following solution options follow the best practices to resolve this namespace conflict?
A. Change the namespace of the artifacts in the libraries to be the same as that of artifacts in the module which is dependent on these libraries.
B. Move the artifacts with common namespaces in the same library.
C. Remove the dependencies and place all required artifacts/business objects in the module itself.
D. Refactor the namespaces of the artifacts in LIB 1 and LIB 2 so that they are unique.
E. Move business object A in the module and delete LIB 1 so that the module has dependency on a single library LIB 2.
正解：A,B
質問 4：
An integration development team is preparing a mediation flow for a test team. The flow contains several primitives (Event Emitter, Message Logger, and Trace) that will only be used for trace and logging purposes. It is known that the inclusion of these additional Tracing primitives will have an adverse effect on performance, so the test team wants the ability to test the meditation flow with and without trace being generated, and with the minimal amount of changes needed to the test setup. How should the integration development team BEST implement the test team's requirements?
A. Set the Transaction property of each primitive to run in their own transaction.
B. Rebuild the mediation flow without the logging and tracing primitives.
C. Set the Enabled property of each primitive to unchecked and redeploy.
D. Promote the Enabled property of each primitive.
正解：D
質問 5：
An integration developer has been tasked to create a solution to process electronic invoices. The invoices must be sent through Web services with a swaRef-type attachment per the Web Services Interoperability Organization (WS-I) Attachment Profile 1.0. Which of the following is a required step in order to expose a module as a Web Service supporting the above technology?
A. Create a custom interface that follows the WS-I Attachment Profile 1.0 in a library and add it in the library section of the dependency editor of the module.
B. Add the predefined SwaRefLib in the library section of the dependency editor of the module.
C. Select the 'WS-I attachment profile 1.0 swaRef schema file' interface in the Predefined Resources section of the dependency editor of the module.
D. Add a custom interface with a field 'attachment' to an export and when generating the WS binding select the '(WS-I) Attachment Profile 1.0 with swaRef' option.
正解：C
質問 6：
An application with a mediation module has been deployed into a test environment. The integration developer would like to delete the transaction log file. Which of the following statements is true regarding this action? Deleting the transaction log file:
A. causes started transactions to either roll back or be committed.
B. could cause started transactions to neither roll back nor be committed.
C. causes transactional information to be rolled over to SystemOut.log.
D. results in the cancellation of subsequent transactions.
正解：B
質問 7：
An integration developer has developed a mediation flow component with one SCA export, one Web Service import and one SCA import. The integration developer is tasked to test the developed mediation flow using integration test client (ITC). The mediation module is not deployed on the test server.
Which of the following is the most appropriate behavior depicted by ITC?
A. ITC will automatically create a test project before performing a mediation module test
B. ITC expects that the module to be tested has been deployed and started on the test server.
C. ITC will automatically deploy the module when it is selected to the test server.
D. ITC will automatically create a test suite before performing a mediation module test.
正解：C
質問 8：
A mediation module contains a mediation flow MF with two levels of hierarchical sub flows. SF1 (within MF) and SF11 (within SF1). The integration developer wants to be able to modify the properties of some of mediation primitives within SF11 at runtime.
What is the correct way to implement this requirement?
A. Set the desired properties as promotable at SF11 and SF1 to make them appear as promotable properties of MF at runtime.
B. Promote the properties for runtime administration till only one level of sub flow hierarchy.
C. Set the desired properties as promotable at SF11 to make them appear as promotable properties of WF at runtime.
D. Promote the properties for runtime administration in a non-hierarchical mediation flow only.
正解：C
Which of the following event delivery types are supported by the WebSphere Adapters?
A. Guaranteed delivery
B. Persistent delivery
C. Ordered delivery
D. Non persistent delivery
正解：C
質問 2：
During testing of an SCA component, an integration developer uses the administrative console to select event points for monitoring using the Common Event Infrastructure (CEI) server.
Which service must be enabled to capture service component event details?
A. Diagnostic Logging service
B. Component Event Monitoring service
C. Diagnostic Trace service
D. Common Base Event Browser service
正解：D
質問 3：
An integration developer has developed a module which depends on two libraries. LIB 1 and LIB
2. The libraries have business objects with a common namespace. The module references a business object A in LIB 1 and business object B in LIB 2.
The integration developer is facing an issue that if the LIB 1 is listed first in the dependency editor the application code within the module can find business object A but not business object B.
Similarly if LIB 2 is listed first in the dependency editor, the program will find business object B but not business object A.
Which of the following solution options follow the best practices to resolve this namespace conflict?
A. Change the namespace of the artifacts in the libraries to be the same as that of artifacts in the module which is dependent on these libraries.
B. Move the artifacts with common namespaces in the same library.
C. Remove the dependencies and place all required artifacts/business objects in the module itself.
D. Refactor the namespaces of the artifacts in LIB 1 and LIB 2 so that they are unique.
E. Move business object A in the module and delete LIB 1 so that the module has dependency on a single library LIB 2.
正解：A,B
質問 4：
An integration development team is preparing a mediation flow for a test team. The flow contains several primitives (Event Emitter, Message Logger, and Trace) that will only be used for trace and logging purposes. It is known that the inclusion of these additional Tracing primitives will have an adverse effect on performance, so the test team wants the ability to test the meditation flow with and without trace being generated, and with the minimal amount of changes needed to the test setup. How should the integration development team BEST implement the test team's requirements?
A. Set the Transaction property of each primitive to run in their own transaction.
B. Rebuild the mediation flow without the logging and tracing primitives.
C. Set the Enabled property of each primitive to unchecked and redeploy.
D. Promote the Enabled property of each primitive.
正解：D
質問 5：
An integration developer has been tasked to create a solution to process electronic invoices. The invoices must be sent through Web services with a swaRef-type attachment per the Web Services Interoperability Organization (WS-I) Attachment Profile 1.0. Which of the following is a required step in order to expose a module as a Web Service supporting the above technology?
A. Create a custom interface that follows the WS-I Attachment Profile 1.0 in a library and add it in the library section of the dependency editor of the module.
B. Add the predefined SwaRefLib in the library section of the dependency editor of the module.
C. Select the 'WS-I attachment profile 1.0 swaRef schema file' interface in the Predefined Resources section of the dependency editor of the module.
D. Add a custom interface with a field 'attachment' to an export and when generating the WS binding select the '(WS-I) Attachment Profile 1.0 with swaRef' option.
正解：C
質問 6：
An application with a mediation module has been deployed into a test environment. The integration developer would like to delete the transaction log file. Which of the following statements is true regarding this action? Deleting the transaction log file:
A. causes started transactions to either roll back or be committed.
B. could cause started transactions to neither roll back nor be committed.
C. causes transactional information to be rolled over to SystemOut.log.
D. results in the cancellation of subsequent transactions.
正解：B
質問 7：
An integration developer has developed a mediation flow component with one SCA export, one Web Service import and one SCA import. The integration developer is tasked to test the developed mediation flow using integration test client (ITC). The mediation module is not deployed on the test server.
Which of the following is the most appropriate behavior depicted by ITC?
A. ITC will automatically create a test project before performing a mediation module test
B. ITC expects that the module to be tested has been deployed and started on the test server.
C. ITC will automatically deploy the module when it is selected to the test server.
D. ITC will automatically create a test suite before performing a mediation module test.
正解：C
質問 8：
A mediation module contains a mediation flow MF with two levels of hierarchical sub flows. SF1 (within MF) and SF11 (within SF1). The integration developer wants to be able to modify the properties of some of mediation primitives within SF11 at runtime.
What is the correct way to implement this requirement?
A. Set the desired properties as promotable at SF11 and SF1 to make them appear as promotable properties of MF at runtime.
B. Promote the properties for runtime administration till only one level of sub flow hierarchy.
C. Set the desired properties as promotable at SF11 to make them appear as promotable properties of WF at runtime.
D. Promote the properties for runtime administration in a non-hierarchical mediation flow only.
正解：C
0 お客様のコメント