最新なJuniper JN0-343問題集（565題）、真実試験の問題を全部にカバー！

質問 1：
You have configured a GRE tunnel between two remote sites. This tunnel will be used to pass traffic using RFC 1918 addressing over the Internet. You have verified that the tunnel interface is up on both endpoints and see the output shown below:
user@router> show interfaces gr-0/0/0.0 terse Interface Admin Link Proto Local Remote gr-0/0/0.0 up up
Traffic between the remote sites is not being passed over this tunnel.
Which action would resolve this problem?
A. You must enable path MTU to ensure packets are properly fragmented.
B. You must use NAT to translate the private addresses to a public address.
C. You must enable the inet protocol family on the GRE interfaces.
D. You must use an IP-IP tunnel to support traffic using RFC 1918 addressing.
正解：C

質問 2：
N NO: 212
You attach six routers (R1, R2, R3, R4, R5, and R6) to a single Ethernet LAN and configure the routers with addresses in the same subnet. You do not modify the default priority of any router. R1 is chosen as the designated router and R2 is chosen as the backup designated router. How many full adjacencies does R3 have?
A. 0
B. 5
C. 1
D. 2
正解：D

質問 3：
What is a requirement for link aggregation?
A. Member links must be on continuous ports.
B. LACP must be configured.
C. The speed of the member links must be the same.
D. Member links must be on the same switch in a Virtual Chassis.
正解：C

質問 4：
Which OSPF reference bandwidth setting would give a 1-Gbps link a metric of 10?
A. 1000
B. 10,000,000
C. 10
D. 10,000,000,000
正解：D

質問 5：
An OSPF broadcast segment has four OSPF-speaking routers. One router is in the DR state, one is in the BDR state, and two are in DR other states. How many 2Way OSPF sessions does a router in the DR other state have?
A. 1 session
B. 2 sessions
C. 4 sessions
D. 3 sessions
正解：B
解説: (Pass4Test メンバーにのみ表示されます)

質問 6：
Which configuration excerpt is necessary to cause all traffic received on fe-0/0/0.0 to be routed to next-hop 10.1.1.1?
A. interfaces {
fe-0/0/0 {
unit 0 {
family inet {
routing-instance to-10.1.1.1;
address 172.17.1.1/24;
}
}
}
}
routing-instances {
to-10.1.1.1 {
instance-type forwarding;
routing-options {
static {
route 0.0.0.0/0 next-hop 10.1.1.1;
}
}
}
}
B. interfaces {
fe-0/0/0 {
unit 0 {
family inet {
policy-route route-to-10.1.1.1;
address 172.17.1.1/24;
}
}
}
}
policy-options {
policy-statement route-to-10.1.1.1 {
term 1 {
then {
next-hop 10.1.1.1;
}
}
}
}
C. interfaces {
fe-0/0/0 {
unit 0 {
family inet {
filter {
input route-to-10.1.1.1;
}
address 172.17.1.1/24;
}
}
}
}
firewall {
family inet {
filter route-to-10.1.1.1 {
term 1 {
then routing-instance to-10.1.1.1;
}
}
}
}
routing-instances {
to-10.1.1.1 {
instance-type forwarding;
routing-options {
static {
route 0.0.0.0/0 next-hop 10.1.1.1;
}
} } }
D. interfaces {
fe-0/0/0 {
unit 0 {
family inet {
filter {
input route-to-10.1.1.1;
}
address 172.17.1.1/24;
}
}
}
}
firewall {
family inet {
filter route-to-10.1.1.1 {
term 1 {
then next-hop 10.1.1.1;
}
}
}
}
正解：C