868 お客様のコメント
質問 1：
Which two statements are true regarding GRE tunnels? (Choose two.)
A. A GRE tunnel can be applied only at the physical interface level.
B. GRE tunnels can be used to send nonroutable packets over a public IP network.
C. GRE tunnels can be used as backup links.
D. GRE can be used to tunnel IP packets only.
正解：B,C
質問 2：
Which routing table contains the route information for the user-defined routing instance called Candidate1?
A. inet.0
B. Candidate1.inet.0
C. Candidate1-inet.0
D. inet.Candidate1.0
正解：B
質問 3：
What are two characteristics of load-balancing implementation on a Junos device?
(Choose two.)
A. It is enabled through a policy.
B. It is enabled by default.
C. It balances packets on a per-packet basis.
D. It balances packets on a per-flow basis.
正解：A,D
質問 4：
Click the Exhibit button.
In the exhibit, R1 is sending the 172.16.100.0/24 route to R2 through EBGP. R2 has IBGP sessions to R3 and R4, but they are not installing the route. All BGP sessions are established.
Which two actions would enable R3 and R4 to install the route from R2? (Choose 2.)
A. Configure an IGP export policy with a next-hop self action on R2.
B. Configure a BGP export policy with a next-hop self action on R2.
C. Configure the cluster-id parameter under the R2 IBGP group.
D. Advertise the R1-R2 link into the IGP.
正解：B,D
質問 5：
You have three aggregate routes all with the same route preference.
What is the second parameter used to determine the active route?
A. highest metric value
B. secondary route preference
C. lowest metric value
D. lowest community value
正解：B
質問 6：
-- Exhibit --
user@router> show bgp summary
Groups: 2 Peers: 2 Down peers: 2
Table Tot Paths Act Paths Suppressed History Damp State Pending
inet.0
0 0 0 0 0 0
Peer AS InPkt OutPkt OutQ Flaps Last Up/Dwn State...
5 .1.1.1 100 1 0 0 14:06 OpenConfirm
1 0.1.1.1 200 0 1 14:06 Active
-- Exhibit --
Click the Exhibit button.
Two newly configured BGP peers have remained in the states shown in the exhibit for several hours.
Which two statements are true? (Choose two.)
A. The TCP three-way handshake has completed successfully with the 10.1.1.1 peer.
B. The local router has received a BGP keepalive message from the 5.1.1.1 peer.
C. The local router is initiating a transport protocol connection with the 10.1.1.1 peer.
D. The TCP three-way handshake has completed successfully with the 5.1.1.1 peer.
正解：C,D
Which two statements are true regarding GRE tunnels? (Choose two.)
A. A GRE tunnel can be applied only at the physical interface level.
B. GRE tunnels can be used to send nonroutable packets over a public IP network.
C. GRE tunnels can be used as backup links.
D. GRE can be used to tunnel IP packets only.
正解：B,C
質問 2：
Which routing table contains the route information for the user-defined routing instance called Candidate1?
A. inet.0
B. Candidate1.inet.0
C. Candidate1-inet.0
D. inet.Candidate1.0
正解：B
質問 3：
What are two characteristics of load-balancing implementation on a Junos device?
(Choose two.)
A. It is enabled through a policy.
B. It is enabled by default.
C. It balances packets on a per-packet basis.
D. It balances packets on a per-flow basis.
正解：A,D
質問 4：
Click the Exhibit button.
In the exhibit, R1 is sending the 172.16.100.0/24 route to R2 through EBGP. R2 has IBGP sessions to R3 and R4, but they are not installing the route. All BGP sessions are established.
Which two actions would enable R3 and R4 to install the route from R2? (Choose 2.)
A. Configure an IGP export policy with a next-hop self action on R2.
B. Configure a BGP export policy with a next-hop self action on R2.
C. Configure the cluster-id parameter under the R2 IBGP group.
D. Advertise the R1-R2 link into the IGP.
正解：B,D
質問 5：
You have three aggregate routes all with the same route preference.
What is the second parameter used to determine the active route?
A. highest metric value
B. secondary route preference
C. lowest metric value
D. lowest community value
正解：B
質問 6：
-- Exhibit --
user@router> show bgp summary
Groups: 2 Peers: 2 Down peers: 2
Table Tot Paths Act Paths Suppressed History Damp State Pending
inet.0
0 0 0 0 0 0
Peer AS InPkt OutPkt OutQ Flaps Last Up/Dwn State...
5 .1.1.1 100 1 0 0 14:06 OpenConfirm
1 0.1.1.1 200 0 1 14:06 Active
-- Exhibit --
Click the Exhibit button.
Two newly configured BGP peers have remained in the states shown in the exhibit for several hours.
Which two statements are true? (Choose two.)
A. The TCP three-way handshake has completed successfully with the 10.1.1.1 peer.
B. The local router has received a BGP keepalive message from the 5.1.1.1 peer.
C. The local router is initiating a transport protocol connection with the 10.1.1.1 peer.
D. The TCP three-way handshake has completed successfully with the 5.1.1.1 peer.
正解：C,D
绪川** -
非常にわかりやすくJN0-360説明されています。合格に必要な知識が定着しやすいように順々に各章を学習できるようになっております