869 お客様のコメント
質問 1：
In RG40 BSS system release Nokia offers the feature Flexi BSC TRX capacity with mcBSC modules. What below is technically correct about this feature?
A. Combining Multicontroller BSC with Flexi BSC and RNC implementations in a common Site Solution for Single RAN evolution.
B. Maintain BSC capacity for the existing installed legacy Radio Network along with capabilities to provide Single RAN capable BSC capacity also for the latest Radio Network with Packet Abis.
C. The combined Flexi BSC / Multicontroller BSC installation creates a powerful combined dual logical BSC configuration consisting of two BSCs.
D. Implementing Flexi BSC TRX capacity with Multicontroller BSC modules inside the FlexiBSC cabinets minimizes the footprint and installation work.
正解：B
質問 2：
What is the maximum number of SGSN that can be connected with BSC in multipoint Gb interface?
A. 8
B. 9
C. 10
D. 6
正解：A
質問 3：
What is the purpose of ad Abis loop test in a Flexi Multiradio BTS GSM/EDGE?
A. The purpose of the Abis loop test is to verify the Abis transmission set-up and quality.During the Abis loop test, Flexi Multiradio BTS generates a test signal pattern in Abis uplink for the timeslots under test.
B. The purpose of the Abis loop test is to verify the Abis loop protection functionality via the integrated transmission protection.
C. The purpose of the Abis loop test is to verify the Abis transmission set-up and quality.During the Abis loop test, Flexi Multiradio BTS generates a test signal pattern via Packet Abis.
D. The purpose of the Abis loop test is to verify the Abis transmission set-up and quality.During the Abis loop test, Flexi Multiradio BTS generates a test signal pattern in Abis downlink for the timeslots under test.
正解：A
質問 4：
How many maximum number of PCUs are in pool?
A. 52.
B. 50.
C. 42.
D. 64.
正解：B
質問 5：
For configuration of cell broadcast messages, which server should be used?
A. Standalone BSC server.
B. NetAct Server.
C. Cell tick.
D. SMSC.
正解：C
質問 6：
Which network element can authenticate GPRS subscribers?
A. BSC.
B. SGSN.
C. LIG.
D. GGSN.
正解：B
質問 7：
The decision to perform a handover for signal reasons is always made by?
A. The BSC that is currently serving the subscriber.
B. The target BS
C. The target BTS.
D. The BTS that is currently serving the subscriber.
正解：A
質問 8：
The result of A8 algorithm is?
A. Ki.
B. Kc.
C. RAND.
D. SRES.
正解：B
質問 9：
What is Nokia Mint and what are the main benefits?
A. Mint is the Nokia solution for Quality products similar to Six Sigma.
B. Mint is a value added pricing tool.
C. Mint is the NI solution used by Nokia project management during roll out.
D. Mint is a NW Eng tool designed to monitor Nokia customers' BTS HW configurations.
正解：D
In RG40 BSS system release Nokia offers the feature Flexi BSC TRX capacity with mcBSC modules. What below is technically correct about this feature?
A. Combining Multicontroller BSC with Flexi BSC and RNC implementations in a common Site Solution for Single RAN evolution.
B. Maintain BSC capacity for the existing installed legacy Radio Network along with capabilities to provide Single RAN capable BSC capacity also for the latest Radio Network with Packet Abis.
C. The combined Flexi BSC / Multicontroller BSC installation creates a powerful combined dual logical BSC configuration consisting of two BSCs.
D. Implementing Flexi BSC TRX capacity with Multicontroller BSC modules inside the FlexiBSC cabinets minimizes the footprint and installation work.
正解：B
質問 2：
What is the maximum number of SGSN that can be connected with BSC in multipoint Gb interface?
A. 8
B. 9
C. 10
D. 6
正解：A
質問 3：
What is the purpose of ad Abis loop test in a Flexi Multiradio BTS GSM/EDGE?
A. The purpose of the Abis loop test is to verify the Abis transmission set-up and quality.During the Abis loop test, Flexi Multiradio BTS generates a test signal pattern in Abis uplink for the timeslots under test.
B. The purpose of the Abis loop test is to verify the Abis loop protection functionality via the integrated transmission protection.
C. The purpose of the Abis loop test is to verify the Abis transmission set-up and quality.During the Abis loop test, Flexi Multiradio BTS generates a test signal pattern via Packet Abis.
D. The purpose of the Abis loop test is to verify the Abis transmission set-up and quality.During the Abis loop test, Flexi Multiradio BTS generates a test signal pattern in Abis downlink for the timeslots under test.
正解：A
質問 4：
How many maximum number of PCUs are in pool?
A. 52.
B. 50.
C. 42.
D. 64.
正解：B
質問 5：
For configuration of cell broadcast messages, which server should be used?
A. Standalone BSC server.
B. NetAct Server.
C. Cell tick.
D. SMSC.
正解：C
質問 6：
Which network element can authenticate GPRS subscribers?
A. BSC.
B. SGSN.
C. LIG.
D. GGSN.
正解：B
質問 7：
The decision to perform a handover for signal reasons is always made by?
A. The BSC that is currently serving the subscriber.
B. The target BS
C. The target BTS.
D. The BTS that is currently serving the subscriber.
正解：A
質問 8：
The result of A8 algorithm is?
A. Ki.
B. Kc.
C. RAND.
D. SRES.
正解：B
質問 9：
What is Nokia Mint and what are the main benefits?
A. Mint is the Nokia solution for Quality products similar to Six Sigma.
B. Mint is a value added pricing tool.
C. Mint is the NI solution used by Nokia project management during roll out.
D. Mint is a NW Eng tool designed to monitor Nokia customers' BTS HW configurations.
正解：D
Kawazono -
NCS_20022101010初学者のわしでも比較的習得しやすいですね。本書で重要ポイント,テクニックを身に付ければ合格がグッとが近づきると思います