667 お客様のコメント
質問 1：
You will be performing a new cluster Data ONTAP 8.3 or later installation.
Which three tools would you download to facilitate this task? (Choose three.)
A. OnCommand System Manager
B. Config Advisor
C. System Setup tool
D. Cluster Config Builder
E. SLDIAG tool
正解：A,B,C
解説: (Pass4Test メンバーにのみ表示されます)
質問 2：
A customer is installing a new system and has determined that they have a broken disk.
What information is required to open a NetApp Support case?
A. disk shelf serial number and shelf ID number
B. serial number or system ID
C. disk HBA firmware and serial number
D. mainboard rev. id
正解：B
質問 3：
You want to support multiple tenants with duplicate IP addresses for your storage system.
Which statement is correct in this scenario?
A. You cannot support multiple tenants on your storage system.
B. You must use different ports on your controller.
C. You must create an additional IPspace.
D. You must create additional VLANs to use multiple tenants.
正解：C
解説: (Pass4Test メンバーにのみ表示されます)
質問 4：
A remote administrator is connecting to a cluster from a different remote network.
According to NetApp best practices, which type of LIF routing is required to accomplish this task?
A. intercluster LIF
B. cluster management LIF
C. data LIF
D. cluster LIF
正解：C
解説: (Pass4Test メンバーにのみ表示されます)
質問 5：
You are performing an installation of a clustered Data ONTAP and you reach the AutoSupport configuration point. You configured AutoSupport with all of the customer's information. But when you trigger AutoSupport, the customer says that they did not receive the message, and neither did NetApp.
Which two actions must be verified? (Choose two.)
A. The customer has enabled port 25 from the storage controllers on their firewall.
B. The customer has enabled routing of email-based messages from the storage controllers on their email server.
C. You can ping the mailhost from the NetApp storage systems.
D. You can ping the NetApp Support site from the storage systems.
正解：A,C
解説: (Pass4Test メンバーにのみ表示されます)
You will be performing a new cluster Data ONTAP 8.3 or later installation.
Which three tools would you download to facilitate this task? (Choose three.)
A. OnCommand System Manager
B. Config Advisor
C. System Setup tool
D. Cluster Config Builder
E. SLDIAG tool
正解：A,B,C
解説: (Pass4Test メンバーにのみ表示されます)
質問 2：
A customer is installing a new system and has determined that they have a broken disk.
What information is required to open a NetApp Support case?
A. disk shelf serial number and shelf ID number
B. serial number or system ID
C. disk HBA firmware and serial number
D. mainboard rev. id
正解：B
質問 3：
You want to support multiple tenants with duplicate IP addresses for your storage system.
Which statement is correct in this scenario?
A. You cannot support multiple tenants on your storage system.
B. You must use different ports on your controller.
C. You must create an additional IPspace.
D. You must create additional VLANs to use multiple tenants.
正解：C
解説: (Pass4Test メンバーにのみ表示されます)
質問 4：
A remote administrator is connecting to a cluster from a different remote network.
According to NetApp best practices, which type of LIF routing is required to accomplish this task?
A. intercluster LIF
B. cluster management LIF
C. data LIF
D. cluster LIF
正解：C
解説: (Pass4Test メンバーにのみ表示されます)
質問 5：
You are performing an installation of a clustered Data ONTAP and you reach the AutoSupport configuration point. You configured AutoSupport with all of the customer's information. But when you trigger AutoSupport, the customer says that they did not receive the message, and neither did NetApp.
Which two actions must be verified? (Choose two.)
A. The customer has enabled port 25 from the storage controllers on their firewall.
B. The customer has enabled routing of email-based messages from the storage controllers on their email server.
C. You can ping the mailhost from the NetApp storage systems.
D. You can ping the NetApp Support site from the storage systems.
正解：A,C
解説: (Pass4Test メンバーにのみ表示されます)
牧村** -
45歳の私が簡単NS0-180合格出来ました。重要なキーワードのNS0-180解説が載っていて分かりやすかったです。