質問 1：
A customer explains that their V3170 NetApp controller has failed over and they do not know what to do next.
In this scenario, what information should the customer collect from the Remote LAN Module (RLM) and send to you? (Choose two.)
A. output from the events all command
B. output from the sp status command
C. output from the events info command
D. output from the system log command
正解：C,D
質問 2：
Click the Exhibit tab.
The customer configured an SVM called "NewSVM" for NFS, configured the volume, "vol_nfs", mounted at "/vol_nfs", and set up NFSv3 as shown in the exhibit. However, if they try to mount from the client with IP address 192.168.10.10, they receive a "permission denied" error.
In this scenario, which action will solve the error condition?
A. Associate a correct export policy to the root volume(/) of NewSVM.
B. Add a rule to the default export policy to Include the -clientmatch 192.168.10.0/24 parameter.
C. Configure the default route for NewSVM correctly.
D. Stop and start NewSVM.
正解：B
質問 3：
You replaced the controller of an HA pair in a 4-node cluster running clustered Data ONTAP 8.3.1. You have gone through all hardware testing requirements before booting the system .
Which action is now required to boot the system successfully?
A. Use the boot_ontap command from the loader prompt.
B. Use the disk reassign -s <souroe systemid> -d <destination systemid> command from maintenance mode.
C. Use the storage disk reassign -s <source system id> -d <destination system id> command from diagnostics mode.
D. Use the storage disk reassign -s <source system id> -d <destination system id> command from the cluster shell.
正解：B
質問 4：
Click the Exhibit tab.
A customer contacts you and asks for assistance in determining which ports can be used for a new broadcast domain on a clustered Data ONTAP 8.3.2 system. The system is serving LUNs using the FC protocol and is in production. However, for Ethernet traffic, it is not yet in production. The customer provides you the output of the network port show command.
Referring to the exhibit, which ports will be eligible to create a new broadcast domain without impacting production storage virtual machines (SVMs) serving FC LUNs?
A. any port on model
B. any port in the cluster broadcast domain on node1 and node2
C. any port in the Default broadcast domain on node1 and node2
D. any port on node2
正解：B
質問 5：
A Linux client is experiencing low throughput when reading a very large file using NFS. Network counters suggest there is packet drop in the network. To confirm whether dropped packets affect the Linux client, you are collecting network traces from the affected systems.
In this scenario, which two actions would be used? (Choose two.)
A. Use the tcptrace command on a Windows client In a separate subnet.
B. Use the traceroute command on the network switch.
C. Use the pktt command on the NetApp controller.
D. Use the tcpdump command on the Linux system.
正解：C,D
質問 6：
A customer mentions that their Windows users cannot access clustered Data ONTAP 8.3.1 CIFS shares.
The users see "access denied" on the Windows side. Host name resolution is working and properly resolves IP to host name and host name to IP and the customer can ping using host name and IP.
In this scenario, which statement describes the problem?
A. NTP is not enabled on the clustered Data ONTAP 8.3.1 cluster.
B. iSCSI has been enabled on the SVM.
C. The time on the controller is skewed by more than five minutes.
D. There is no proper route to the storage virtual machine (SVM) running the CIFS server.
正解：B
A customer explains that their V3170 NetApp controller has failed over and they do not know what to do next.
In this scenario, what information should the customer collect from the Remote LAN Module (RLM) and send to you? (Choose two.)
A. output from the events all command
B. output from the sp status command
C. output from the events info command
D. output from the system log command
正解：C,D
質問 2：
Click the Exhibit tab.
The customer configured an SVM called "NewSVM" for NFS, configured the volume, "vol_nfs", mounted at "/vol_nfs", and set up NFSv3 as shown in the exhibit. However, if they try to mount from the client with IP address 192.168.10.10, they receive a "permission denied" error.
In this scenario, which action will solve the error condition?
A. Associate a correct export policy to the root volume(/) of NewSVM.
B. Add a rule to the default export policy to Include the -clientmatch 192.168.10.0/24 parameter.
C. Configure the default route for NewSVM correctly.
D. Stop and start NewSVM.
正解：B
質問 3：
You replaced the controller of an HA pair in a 4-node cluster running clustered Data ONTAP 8.3.1. You have gone through all hardware testing requirements before booting the system .
Which action is now required to boot the system successfully?
A. Use the boot_ontap command from the loader prompt.
B. Use the disk reassign -s <souroe systemid> -d <destination systemid> command from maintenance mode.
C. Use the storage disk reassign -s <source system id> -d <destination system id> command from diagnostics mode.
D. Use the storage disk reassign -s <source system id> -d <destination system id> command from the cluster shell.
正解：B
質問 4：
Click the Exhibit tab.
A customer contacts you and asks for assistance in determining which ports can be used for a new broadcast domain on a clustered Data ONTAP 8.3.2 system. The system is serving LUNs using the FC protocol and is in production. However, for Ethernet traffic, it is not yet in production. The customer provides you the output of the network port show command.
Referring to the exhibit, which ports will be eligible to create a new broadcast domain without impacting production storage virtual machines (SVMs) serving FC LUNs?
A. any port on model
B. any port in the cluster broadcast domain on node1 and node2
C. any port in the Default broadcast domain on node1 and node2
D. any port on node2
正解：B
質問 5：
A Linux client is experiencing low throughput when reading a very large file using NFS. Network counters suggest there is packet drop in the network. To confirm whether dropped packets affect the Linux client, you are collecting network traces from the affected systems.
In this scenario, which two actions would be used? (Choose two.)
A. Use the tcptrace command on a Windows client In a separate subnet.
B. Use the traceroute command on the network switch.
C. Use the pktt command on the NetApp controller.
D. Use the tcpdump command on the Linux system.
正解：C,D
質問 6：
A customer mentions that their Windows users cannot access clustered Data ONTAP 8.3.1 CIFS shares.
The users see "access denied" on the Windows side. Host name resolution is working and properly resolves IP to host name and host name to IP and the customer can ping using host name and IP.
In this scenario, which statement describes the problem?
A. NTP is not enabled on the clustered Data ONTAP 8.3.1 cluster.
B. iSCSI has been enabled on the SVM.
C. The time on the controller is skewed by more than five minutes.
D. There is no proper route to the storage virtual machine (SVM) running the CIFS server.
正解：B
0 お客様のコメント