1128 お客様のコメント
質問 1：
Which resource would you use to search for information about the configurations for NetApp products that work with
third-party solutions?
A. Host Utility Kit
B. Clustered Data ONTAP 8.3 SAN Administration Guide
C. Config Advisor
D. Interoperability Matrix Tool
正解：D
解説: (Pass4Test メンバーにのみ表示されます)
質問 2：
Click the Exhibit button.
After mapping the LUN on the cluster, you are not able to see in on the Windows 2012 host.
cl01::>igroup show -instance
Vserver Name: svm1
Igroup Name: ig1-win
Protocol: iscsi
OS Type: Windows
Portset Binding Igroup: -
Igroup UUID: 358338ba-cfd6-
11df-a9ab-123478563412
Initiators: iqn.1991-
05.com.microsoft: host1 (not
logged in)
Referring to the exhibit, what is the problem?
A. The OS type should be windows_2008.
B. An administrator is not logged into the host.
C. The OS type should be windows_gpt.
D. The iSCSI target has not been added to the host.
正解：D
質問 3：
Microsoft ODX supports which scenario on clustered Data ONTAP 8.3?
A. moving a VHDX from a SAN LUN source to a SAN LUN destination with no SMB support
B. moving a VHDX with both SMB 2.1 and SAN protocols as either source or destination
C. moving a VHDX from an SMB 3.0 source to an SMB 3.0 destination with no SAN support
D. moving a VHDX with both SMB 3.0 and SAN protocols as either source or destination
正解：B
質問 4：
Which command enables the FC protocol on clustered Data ONTAP?
A. node run node <node_name>fcadmincongig -e
B. vserverfpolicy enable -vserver<node_name> -policy -name <policy_name> -sequence- number <seq_num>
C. vserveriscsi create-vserver<vserver_name> -target -alias <vserver_name>
D. vserverfcp create -vserver<vserver_name> -status -adain up
正解：D
解説: (Pass4Test メンバーにのみ表示されます)
質問 5：
You have a 4-node FAS8040 cluster licensed for FCP and iSCSI. Each node has both FC and iSCSI LIFs. One of your
Windows 2012 Servers has a single 8Gb FC port and a single 10 Gb Ethernet port with switched connectivity to the FC
and Ethernet ports on the cluster. You need to use both ports on the host for multipath access to a LUN on the NetApp
cluster.
What will accomplish this task?
A. iSCSI HBA
B. NetApp Data ONTAP DSM for Windows MPIO
C. FCoE HBA
D. native Windows MPIO
正解：B
質問 6：
You are creating a logical diagram for an FCP SAN solution.
You need to show connectivity between which three sets of components? (Choose three.)
A. hosts and FCP switches
B. management port and ACP cabling
C. hosts and FCoE switches
D. FCP switches and storage controller
E. inter-cluster network ports and hosts
正解：C,D,E
質問 7：
Click the Exhibit button.
Referring to the exhibit, how many paths to the LUN are visible from the host?
A. 8
B. 16
C. 32
D. 24
正解：A
質問 8：
Which two port personality combinations are valid for the onboard UTA2 ports on a FAS8040 controller?
A. e0e/0e - fc
e0f/0f - fc
e0g/0g - fc
e0h/0h -cna
B. e0e/0e - cna
e0f/0f -cna
e0g/0g - fc
e0h/0h - fc
C. e0e/0e - fc
e0f/0f - cna
e0g/0g - fc
e0h/0h -cna
D. e0e/0e - fc
e0f/0f - fc
e0g/0g - cna
e0h/0h -cna
正解：A
Which resource would you use to search for information about the configurations for NetApp products that work with
third-party solutions?
A. Host Utility Kit
B. Clustered Data ONTAP 8.3 SAN Administration Guide
C. Config Advisor
D. Interoperability Matrix Tool
正解：D
解説: (Pass4Test メンバーにのみ表示されます)
質問 2：
Click the Exhibit button.
After mapping the LUN on the cluster, you are not able to see in on the Windows 2012 host.
cl01::>igroup show -instance
Vserver Name: svm1
Igroup Name: ig1-win
Protocol: iscsi
OS Type: Windows
Portset Binding Igroup: -
Igroup UUID: 358338ba-cfd6-
11df-a9ab-123478563412
Initiators: iqn.1991-
05.com.microsoft: host1 (not
logged in)
Referring to the exhibit, what is the problem?
A. The OS type should be windows_2008.
B. An administrator is not logged into the host.
C. The OS type should be windows_gpt.
D. The iSCSI target has not been added to the host.
正解：D
質問 3：
Microsoft ODX supports which scenario on clustered Data ONTAP 8.3?
A. moving a VHDX from a SAN LUN source to a SAN LUN destination with no SMB support
B. moving a VHDX with both SMB 2.1 and SAN protocols as either source or destination
C. moving a VHDX from an SMB 3.0 source to an SMB 3.0 destination with no SAN support
D. moving a VHDX with both SMB 3.0 and SAN protocols as either source or destination
正解：B
質問 4：
Which command enables the FC protocol on clustered Data ONTAP?
A. node run node <node_name>fcadmincongig -e
B. vserverfpolicy enable -vserver<node_name> -policy -name <policy_name> -sequence- number <seq_num>
C. vserveriscsi create-vserver<vserver_name> -target -alias <vserver_name>
D. vserverfcp create -vserver<vserver_name> -status -adain up
正解：D
解説: (Pass4Test メンバーにのみ表示されます)
質問 5：
You have a 4-node FAS8040 cluster licensed for FCP and iSCSI. Each node has both FC and iSCSI LIFs. One of your
Windows 2012 Servers has a single 8Gb FC port and a single 10 Gb Ethernet port with switched connectivity to the FC
and Ethernet ports on the cluster. You need to use both ports on the host for multipath access to a LUN on the NetApp
cluster.
What will accomplish this task?
A. iSCSI HBA
B. NetApp Data ONTAP DSM for Windows MPIO
C. FCoE HBA
D. native Windows MPIO
正解：B
質問 6：
You are creating a logical diagram for an FCP SAN solution.
You need to show connectivity between which three sets of components? (Choose three.)
A. hosts and FCP switches
B. management port and ACP cabling
C. hosts and FCoE switches
D. FCP switches and storage controller
E. inter-cluster network ports and hosts
正解：C,D,E
質問 7：
Click the Exhibit button.
Referring to the exhibit, how many paths to the LUN are visible from the host?
A. 8
B. 16
C. 32
D. 24
正解：A
質問 8：
Which two port personality combinations are valid for the onboard UTA2 ports on a FAS8040 controller?
A. e0e/0e - fc
e0f/0f - fc
e0g/0g - fc
e0h/0h -cna
B. e0e/0e - cna
e0f/0f -cna
e0g/0g - fc
e0h/0h - fc
C. e0e/0e - fc
e0f/0f - cna
e0g/0g - fc
e0h/0h -cna
D. e0e/0e - fc
e0f/0f - fc
e0g/0g - cna
e0h/0h -cna
正解：A
Matsuura -
合格できました！他の方るよもおっしゃっていうに、模擬試験を何回か解き、身に付けることで合格できました！
ありがとうございました。お薦めします。